Configuracion del router paket tracer

Router>enable

Router#config t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int serial2/0

Router(config-if)#encap ppp

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router(config-if)#clock rate 64000

Router(config-if)#ip address 192.168.1.1 255.255.255.0

Router(config-if)#exit

Router(config)#int f0/0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Router(config-if)#ip address 192.168.2.1 255.255.255.0

Router(config-if)#exit

Router(config)#exit

%SYS-5-CONFIG_I: Configured from console by console

Router#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

Router#